Pistol Smith Forum banner
1 - 1 of 1 Posts

· Registered
345 Posts
If you have Brownells tool for removing them, you can loosen up red Loctite by putting a soldering gun tip into the bushing and turn it on for a minute or so. Usually breaks free.
If it is a case of being staked (look at the back side for staking marks) you have to do it by main force and awkwardness. Putting a cheater rod on the tool helps.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.