Pistol Smith Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi, I have two BDM's and can't find any printed info on complete disassembly/reassembly. One of them has a really long and heavy trigger pull I want to fix. Anyone know of a publication that contains info for the BDM?
 

·
Registered
Joined
·
1,810 Posts
Here's the owner's manual that has a schematic.
Using that you should be able to do it.

http://stevespages.com/pdf/browning_bdm.pdf

Another option is to search Youtube for a video.
Just be careful who you trust. A lot of Youtube gun videos are done by total jack leg amateurs who can lead you to do serious damage.

Other than that, there don't appear to be any armorers manuals showing complete disassembly of the BDM.

If you don't think you can do it from a schematic, you'd be better off having a professional pistolsmith do the job.
It's way too easy to botch a trigger job in a pistol and then you're screwed because new parts are almost nonexistent.
 

·
Registered
Joined
·
1 Posts
If anyone is interested in a guide for detail stripping a BDM, send me a pm and I'll send you a pdf I put together. It has a lot of photos, and should be fairly easy to follow.

Chuck
 

·
Registered
Joined
·
2 Posts
If anyone is interested in a guide for detail stripping a BDM, send me a pm and I'll send you a pdf I put together. It has a lot of photos, and should be fairly easy to follow.

Chuck
Chuck,
I am very interested in you detail stripping guide for the Browning BDM. I have succesfully stripped mine for Cerakote and would like some guidance for its re-assembly and it sounds like your guide may be just the ticket..
 
1 - 10 of 10 Posts
Top