Pistol Smith Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
104 Posts
Congrats on the new gun.

1. Lock slide to the rear, insert tool into guide rod, release slide (hold it), align take-down notch in slide with slide stop and push out, remove slide assy from frame.

2. There should be a round looking tool in your kit that looks like an enclosed screw driver bit. This should slip over the bushing and allow you to get the proper amount of force to remove grip screw bush.

Good luck!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top