Pistol Smith Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
140 Posts
Discussion Starter · #1 ·
Howdy folks,my ILS wont lock.I took the mainspring housing out to clean and oil it because it had a little surface rust spots but none on internal parts,the grip saftey is working and the hammer has the same amount of tension as new.It seems that it worked fine when I did it but its been a while.Just need to know if it can cause a major malfuntion,I dont care for the ILS anway?Thanks
 

· Registered
Joined
·
140 Posts
Discussion Starter · #5 ·
The ILS wont turn when key is inserted!Thanks for asking by the way.I guess I could take it back apart and look for myself but I dont feel putting the extra ware and tear on the gun is worth making the ILS work if it's not going to be used.I am only worried about because I dont want to damage anything important.
 

· Registered
Joined
·
893 Posts
I say that the ILS NOT engaging is a good thing. That aside, if you have to take it apart, you might as well replace it with a normal MSH.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top