Pistol Smith Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
248 Posts
I used to despise mag safeties. I have learned that they are not a detriment to a good trigger if you know how to do a proper trigger job. S&W will omit this feature on Police weapons but specifically forbids armorers from converting them. The easy way to disable this feature is to look at the difference in the 1076. It does not have this feature (The FBI spec'd it w/o mag safety). the only difference is the lack of spring and plunger (the plastic one) in the slide. to remove these you must remove the rear sight (always take off from right to left and replace in reverse order). Do so at your own risk, I'm sure a court would look at the removal of any safety device as grounds for a law suit in a shooting.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top