Pistol Smith Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
473 Posts
Don't sandblast the gun. Glassbeading is ok. Sand is too aggressive on metal. Teflon moly works good but I would glassbead it lightly first to aid with adhesion. I used it on a wilson slide it worked well. Heat up the slide and can of paint, spray and bake.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top