Pistol Smith Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
3,552 Posts
Discussion Starter · #1 ·
Since Shay and Hilton mentioned it I'll fess up to carrying a "parts" gun. Bad parts at that! This is not the best grade gun built from new spec'ed parts :oops: This is not a gun that Larry or Dick would have in their own holsters I suspect.

It grinds on me to be traveling and teaching with something I wouldn't sell to a customer but...as Tracy loves to remind me.."I build guns for a living" :grin: None of the guns I have started collecting would I want in a fight or to teach with. I guess ugly is better than UN reliable :roll: Rule in our house is, "if a BCP 1911 can be sold..sell it"

So here is the story about the "hog" gun. Christened this month in Florida for it's ability to throw a sneak on them baby hogs you have down south :wink:

Frame is 8 or 9 years old,a Springfield NM in stainless. I recut the front strap, trigger guard and dust cover to Colt specs. I also flattened the front of the trigger guard and high gripped it along the lines of what Jericho frames are now. (It is no wonder I like Jericho OEM frames) Added a older Caspian beavertail and cut it way down and high gripped it as much as possible. Then I hard chromed it.

Frame has had half a dozen top ends. 9x21, 38 Super, 9x23, and several 45s. I had put it away last year because it was so loose, even the NM slides new from the wrapper were sloppy on it! It was "retired".

Along comes one of my spec guns, back for a tune up. I decided the slide (a Wilson with Hienie's on it) was too loose so I wanted to tighten it. A little too much torgue on the vice and I owned a new slide :sad: Bad move, not to be repeated! Couple hours with a BIG rubber mallet and some lapping compound that slide and the SA frame were "fitted". Not something I would ever sell but not a bad basis for a "truck" gun either. Heinie's are full size front and black on black, with Black T over chrome.

BarSto came from a refit at Quantico. Somebody got really carried away making relief cuts.

Trigger system is best grade tool steel cut along Swenson's old design with a solid Vedecki set @ a CRISP 5#. Brown single safety cut down, and Brown steel main. Tit. cap and strut, factory mainspring and 16.5# Wolfe recoil and leaf. Colt mag release, slide release and recoil system. One of a kind Micarta dbl diamond grips, S&A engraved screws.


Hilton is right, I took a LITTLE extra time putting it together. I like to say "GOD is in the details." Shay saw how it shoots. Gun is good enough for a retired old duffer like me :oops: I doubt I could ever keep up with the gun.

But next year's teaching gun is going to be a SHOW stopper :roll:




<font size=-1>[ This Message was edited by: Dane Burns on 2001-11-08 15:21 ]</font>
 

· Registered
Joined
·
3,552 Posts
Discussion Starter · #7 ·
Hilton, all it takes is time and a good file :grin:

You noticed on the time thing, uh?

Ya, you could but a coupe of nice Series 70 guns for the time I have in the recutting and modifing this one.

Just goes to show you, there actually is a gun hidden inside a Springfield :wink: And some times a silk purse can come from a sow's ear :eek:
 

· Registered
Joined
·
3,552 Posts
Discussion Starter · #13 ·
TOUGH CROWD !

You guys better hope my wife NEVER reads this forum! She thinks everyone has at least half a dozen good blasters :roll:

Luigi has a 15K$ engraved SSA and a stolen BCP, and 256 sends me two priceless full house Swensons to clean, DD has more guns than GAWD and Bruce owns more BCP guns than I do. Then Dick Heinie builds a brace of trick guns for Sara, his office helper for chrimney sake!!

GEeeeeeeeeezzzzzzzee.......even Tracy has has ONE full house BCP.

You would think a hard working pistolsmith deserves a couple of quality blasters even if he has to buy them :grin:


<font size=-1>[ This Message was edited by: Dane Burns on 2001-04-16 14:50 ]</font>
 

· Registered
Joined
·
3,552 Posts
Discussion Starter · #20 ·
Hey I tried to sell this gun. The three guys I offered it too knew it's history and none were willing to pay $3000...imagine that :roll:

But thanks to this friendly crew my lovely wife made a point of me at least "trying" to sell it!

Her label for me is "maker" and more importantly SELLER. My label for me is user and collector :grin: Amazing she leaves me home alone!

<font size=-1>[ This Message was edited by: Dane Burns on 2001-06-11 13:02 ]</font>
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top